
Operation
2.6 Switching Off/Shutdown
Under normal circumstances, all that you need do is to
electrically switch off the TRIVAC-B.
No further measures will be required.
When pumping condensable media let the pump conti-
nue to operate with the gas ballast valve open and the
intake line closed before switching off (see Section
2.5.2).
When pumping aggressive or corrosive media, let the
pump continue to operate even during long non-working
intervals (e.g. overnight) with the intake line closed and
the gas ballast valve open. This avoids corrosion during
idle periods.
If the TRIVAC-B is to be shutdown for an extended peri-
od after pumping aggressive or corrosive media or if the
pump has to be stored, proceed as follows:
When pumping harmful substances, take
adequate safety precautions.
Our technical sales department is available for further
advice in these matters.
Drain the oil (see Section 3.2).
Add clean oil until the oil-level is at the „min“ mark (see
Section 3.2) and let the pump operate for some time.
Then drain the oil and add clean oil until the oil level is at
the „max“ mark (see Section 3.2).
Seal the connection ports. Special conservation or anti-
corrosion oils aren’t necessary.
Please also take note of the information
given in Section 3.9 (storage and storage
conditions).
2.6.1 Shut-Down through Monitoring Com-
ponents
When the pump has been switched off due
to overheating sensed by the motor coil pro-
tector or other monitoring components at
the pump (e. g. thermal sensor), the pump
must only be started manually after the
pump has cooled down to the ambient tem-
perature and after having removed the
cause first.
2.6.2 Failure of the Control System or the
Mains Power
In order to prevent the pump from running
up unexpectedly after a mains power failu-
re, the pump must be integrated in the con-
trol system in such a way that the pump can
only be switched on again manually. This
applies equally to emergency cut-out arran-
gements.
14
GA 01.202/9.02 - 03/96
Caution
Attention
Caution
Caution
Comentarios a estos manuales