
Operation
2.4.1 Areas of Application
The pump is not suitable for pumping of:
- ignitable and explosive gases or vapours
- oxidants
- pyrophorous gases.
The pumps are not suitable for pumping of
liquids or very dusty media. Suitable pro-
tective devices must be installed.
Our technical sales department is available for further
advice in these matters.
2.4.2 Remarks for Pumps with
EExe II T3-Motors
There are no objections against using the vacuum pump
in an explosion hazard area of ZONE 1, a temperature
class T3 and explosion group IIB provided the following
conditions will be fulfilled:
Caution
Install a suitable motor protection switch in
front of the vacuum pump’s electric motor. If
the vacuum pump is supplied as ready-to-
plug-in unit the customer himself must
install the motor protection switch and in a
pressure-resistant encapsulation version.
If the vacuum function fails the vacuum
pump must be switched off automatically
via an interruption of the power supply.
Due to the measures taken the vacuum
pump is not suited to pump oxygen and
explosive atmosphere.
12
GA 01.202/9.02 - 03/96
Caution
Comentarios a estos manuales