Aeg-Electrolux HD634170NB Manual de usuario descargar pdf (Pagina 18)

• This appliance is supplied with a mains

cable. It has to be supplied with a cor-

rect plug which can hold the load that

the rating plate rates. Make sure that

you install the plug in a correct socket.

• Always use a correctly installed shock-

proof socket.

• Make sure that there is an access to

the mains plug after the installation.

• Do not pull the mains cable to discon-

nect the appliance. Always pull the

mains plug.

• There is a risk of fire when the appli-

ance is in connection with an exten-

sion cable, an adapter or a multiple

connection. Make sure that the

ground connection agrees with the

standards and regulations.

• Do not let the power cable to heat up

to a temperature higher than 90° C.

To prevent contact between the cable

and the appliance below the hob use

the clamps which are on the side of the

cabinet.

Rigid copper pipe or flexible pipe of

stainless steel

8.5 Replacement of the

connection cable

To replace the connection cable use on-

ly H05V2V2-F T90 or equivalent type.

Make sure that the cable section is appli-

cable to the voltage and the working

temperature. The yellow/green earth

wire must be approximately 2 cm longer

than the brown (or black) phase wire.

8.6 Assembly

min.

50mm

min.

500mm

min.

2mm

A — supplied seal

R 5mm

min.

55mm

490

560

www.aeg.com

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Comentarios a estos manuales

Sin comentarios

Aeg-Electrolux HD634170NB Manual de usuario Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Aeg-Electrolux HD634170NB