Aeg-Electrolux HD634170NB Manual de usuario descargar pdf (Pagina 15)

Problem Possible cause and remedy

comes on

• No cookware on the cooking zone. Put cookware

on the cooking zone.

• Not correct cookware. Use the correct cookware.

• The diameter of the bottom of the cookware is

too small for the cooking zone. Move cookware

to a smaller cooking zone.

and number come on

There is an error in the appliance.

Disconnect the appliance from the electrical supply

for some time. Disconnect the fuse from the electri-

cal system of the house. Connect again. If

comes

on again, speak to the After Sales Service.

comes on

There is an error in the appliance, because a cook-

ware boils dry or you use not correct cookware.

Overheating protection for the cooking zone oper-

ates. The automatic switch-off operates.

Switch off the appliance. Remove the hot cookware.

After approximately 30 seconds switch on the cook-

ing zone again. should disappear, residual heat indi-

cator can stay. Cool down the cookware and check

it with the section Cookware for the induction cook-

ing zone.

There is no spark when

lighting the gas.

• There is no electrical supply. Make sure that the

unit is connected and the electrical supply is

switched on. Examine the house electrical instal-

lation fuse.

• Burner cap and crown are placed uneven. Make

sure that the burner cap and crown are in correct

positions.

The flame is blow out im-

mediately after ignition.

Thermocouple is not heated sufficient. After light-

ing the flame, keep the knob pushed for approxi-

mately 5 seconds.

The gas ring burns un-

evenly.

Burner crown is blocked with food residues. Make

sure that the injector is not blocked and the burner

crown is clear of food particles.

If there is a fault, first try to find a solu-

tion to the problem yourself. If you can-

not find a solution to the problem your-

self, speak your dealer or the local Serv-

ice Force Centre.

If you operated the appliance in-

correctly, or the installation was

not carried out by a registered

engineer, the visit from the cus-

tomer service technician or deal-

er may not take place free of

charge, even during the warranty

period.

These data are necessary to help you

quickly and correctly. These data are

available on the supplied rating plate.

• Model description .................

• Product number (PNC) .................

• Serial Number (S.N.) .................

Use the original spare parts only. They

are available at Service Force Centre and

approved spare parts shops.

7.1 Labels supplied with the

accessories bag

Stick the adhesive labels as indicated

below:

ENGLISH 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Comentarios a estos manuales

Sin comentarios

Aeg-Electrolux HD634170NB Manual de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Aeg-Electrolux HD634170NB