Aeg-Electrolux 6310K-M Manual de usuario descargar pdf (Pagina 7)

7

Protection of the glass

ceramic surface

A protective film should be applied

to the glass ceramic surface before

use. This will make it easier to

clean the surface, as well as

preventing substances from being

burnt onto the surface.

This is what to do:

1. Pour a few drops of ceramic

cleaning detergent such as

vitroclen onto a piece

of kitchen roll and rub the

detergent into the entire surface.

2. Polish the surface with a clean

cloth until it is dry.

Before use

14

The decorative pattern on the ceramic

surface can become scratched and

marred with use, depending upon

maintenance, but does not adversely

affect performance.

Such blemishes are not covered by the

warranty.

Spills and melts must be removed

immediately, while the burner is still

warm, using the scraper supplied with

the unit. Especially damaging are melted

plastic, aluminium, or any foodstuff

containing sugar, including natural sugar,

as these can create permanent

“pockmarks” and craters on the ceramic

surface. After scraping polish thoroughly

with the cleaning agent supplied with the

unit.

Utensils which have been in contact with

the above-mentioned melted materials

must be cleaned thoroughly before used

again on the ceramic-top hob unit.

Defects in the ceramic surface which can

be related to the above are not covered

by the warranty.

Utensils with aluminium bottoms can

cause light spots on the ceramic surface.

These can be removed with the cleaning

agent supplied with the unit.

Warning:

Aluminium foil and plastic utensils are

not to be placed on hot surfaces.

The surface may not be used for

storage.

Do not stare at the heating units

when in operation.

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios