
Touch the symbol to switch off this function. The heat setting that you set before comes
on.
When you switch off the appliance, you also switch off this function.
The child safety device
This function prevents an accidental operation of the hob.
Starting the child safety device
•
Start the hob with
. Do not set the heat settings .
•Touch
until the acoustic signal. . The symbol comes on. Switch off the appliance.
Switching off the child safety device
• Start the hob with
. comes on. Touch until the acoustic signal. comes on
• Switch off the appliance.
Overriding the child safety device for one cooking session
• Start the hob with
. The symbol comes on.
•
Touch
until the acoustic signal. The symbol comes on. Set the heat setting in
less than 10 seconds. You can operate the hob. When you stop the hob with
, the
child safety device operates again.
Helpful hints and tips
Cookware
• The bottom of the cookware must be as thick and flat as possible.
• Cookware made of enamelled steel and with aluminium or copper bottoms can cause
discoloration on glass ceramic surface.
Cookware for induction cooking zones
In induction cooking a powerful electromagnetic field generates an almost instant heat
inside the cookware.
Cookware material
•
correct: cast iron, steel, enamelled steel, stainless steel, a multi-layer bottom (marked
as correct by a manufacturer).
•
not correct: aluminium, copper, brass, glass, ceramic, porcelain.
Cookware is correct for an induction hob if …
• ... some water boils very quickly on a zone set to the highest heat setting..
• ... a magnet pulls on to the bottom of the cookware.
The bottom of the cookware must be as thick and flat as possible.
Cookware dimensions : induction cooking zones adapt to the dimension of the bottom
of the cookware automatically to some limit. But, the magnetic part of the bottom of the
cookware must have a minimum diameter of approximately 3/4 of the cooking zones.
10
Helpful hints and tips
Comentarios a estos manuales