Aeg-Electrolux 67670K-MN 46F Manual de usuario descargar pdf (Pagina 17)

Safety cut-out

Cooking surface

• If after switching on the cooking surface, a heat setting is not set for

a cooking zone within approx. 10 seconds, the cooking surface auto-

matically switches itself off.

• If one or more sensor fields are covered by objects (a pan, cloths, etc.)

for longer than approx. 10 seconds, a signal sounds and the cooking

surface switches off automatically.

• If all cooking zones are switched off, the cooking surface automati-

cally switches itself off after approx. 10 seconds.

Control panel

• When the appliance is switched off, if one or more of the sensor

fields on the control panel are covered for more that 10 seconds, an

acoustic signal sounds. The acoustic signal switches itself off auto-

matically when the sensor fields are no longer covered.

Induction cooking zones

• In the event of overheating (e.g. when a pan boils dry) the cooking

zone automatically switches itself off. is displayed. Before being

used again, the cooking zone must be set to 0 and allowed to cool

down.

• If cookware that is not suitable is used, flashes in the display and

after 2 minutes the display for the cooking zone switches itself off.

all cooking zones

• If one of the cooking zones is not switched off after a certain time, or

if the heat setting is not modified, the relevant cooking zone switches

off automatically. is displayed. Before being used again, the cook-

ing zone must be set to 0.

Heat setting Switches off after

V, 1 - 2

6 hours

3 - 4

5 hours

4 hours

6 - 9

1.5 hours

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 33 34

Sin comentarios

Aeg-Electrolux 67670K-MN 46F Manual de usuario Pagina 17