Aeg-Electrolux E3781-7-M Manual de usuario descargar pdf (Pagina 24)

– "3:15" appears in the display,

–Duration

flashes for approximately 5 seconds.

While Duration

flashes, use + or - to set the necessary length for the procedure.

You can set "2:15" (P2 - Pyroluxe menue light) for less dirt and "3:15" (P1 - Pyroluxe

menue intensive) for more dirt.

If Duration no longer flashes, push the Selection button again and then set length

for the pyrolytic procedure.

You can also change switch off time for pyrolytic cleaning using the clock function

End

(within 2 minutes of the pyrolytic cleaning starts).

4. Pyrolytic cleaning starts.

During pyrolytic cleaning the light does not operate.

When the oven reaches pre-set temperature, the door locks.

The bars of the heat indicator come up, until the door unlocks again.

Shelf Support Rails

Removing the shelf support rails

1. Pull the front of the shelf support rail

away from the side wall.

2. Pull the rear shelf support rail away

from the side wall and remove it.

Installing the shelf support rails

Install the shelf support rails in opposite sequence.

Important! The rounded ends of the shelf support rails must point to the front!

Oven lamp

WARNING!

There is a danger of electrical shock!

Care and cleaning

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Sin comentarios

Aeg-Electrolux E3781-7-M Manual de usuario Pagina 24