Aeg-Electrolux 88032K-IN Manual de usuario Pagina 37

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 76
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 36
Sticking the seal to the rabbet
Clean the rabbet in the work surface.
Stick the one-sided self-adhesive sealing tape supplied onto the upper surface of the
rabbet along the edges of the cut-out section.
Cut the sealing tape into four pieces relating to the length of the edges of the rabbet.
For the four corners of the rabbet the ends of the sealing tapes must be cut into mitres.
Do not stick the ends over one another.
Stick the sealing tape flush into the corner of the rabbet, so that no silicon compound
can get under the glass ceramic when grouting.
Don’t stretch the tapes when sticking them on.
Assembly
min. 500
min. 5
min.
50
R10
R5
12
7
514 +1
490
750
774 +1
min. 600
min. 25
min. 5
min. 20
min. 38
min. 5
Safety information
37
Vista de pagina 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 75 76

Comentarios a estos manuales

Sin comentarios