Aeg-Electrolux HG795440NB Manual de usuario descargar pdf (Pagina 16)

WARNING!

Do not use abrasive cleaners, steel wool pads or acids, they can cause damage to the appli-

ance.

Scratches or dark stains on the glass have no effect on how the appliance operates.

• You can remove the pan supports to easily clean the hob.

• To clean the enamelled parts, cap and crown, wash it with warm soapy water and dry it

carefully before you put them back.

• Stainless steel parts wash with water, and then dry with a soft cloth.

• The pan supports are not dishwasher proof; they must be washed by hand.

• When you wash the pan supports by hand, take care when you dry them as the enamel-

ling process occasionally leaves rough edges. If necessary, remove stubborn stains using a

paste cleaner.

• Make sure you position the pan supports correctly after cleaning.

• To make burners work correctly, make sure that the arms of the pan supports are in the

centre of the burner.

• Be very careful when you replace the pan supports to prevent the hob top from

damage.

After cleaning, dry the appliance with a soft cloth.

Removing the dirt:

1. – Remove immediately: melting plastic, plastic foil, and food containing sugar.

– Stop the appliance and let it cool down before you clean: limescale rings, water

rings, fat stains, shiny metallic discolorations. Use a special cleaner for glass or

stainless steel.

2. Clean the appliance with a damp cloth and some detergent.

3. At the end rub the appliance dry with a clean cloth.

To keep the pan supports in the correct position, they are mounted on metal pins located in

the rear sides of the hob. To ensure a better cleaning, pan supports can be removed from

the hob. Lift up the pan supports keeping them in horizontal position.

WARNING!

Avoid lifting the pan supports at an angle, as this will put strain on the metal pins. This may

damage the pins and cause them to break.

Cleaning of the spark plug

This feature is obtained through a ceramic ignition candle with a metal electrode. Keep

these components well clean to prevent difficult lighting and check that the burner crown

holes are not obstructed.

Periodic maintenance

Periodically speak your local Service Force Centre to check the conditions of the gas supply

pipe and the pressure adjuster, if fitted.

16 Care and cleaning

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Sin comentarios

Aeg-Electrolux HG795440NB Manual de usuario Pagina 16