AEG Electrolux EHD 8680 X Manual de usuario descargar pdf (Pagina 10)

- 10 -

DGS-TDS-N 12.08 U. H. / A. B. © Electrolux 599 714 137 EN

4.4 Error Codes induction hobs

Remark for hobs with left and right interface:

If a Error occurs the hob switches off automatically. Switch the hob on again the error is

displayed again. Afterwards the Error disaapears and the defect side is shown by the displays

“?” for bargraph or “E” in the 7-segment displayes.

4.5 Error Codes for cooking hobs with radiant heating

Error in the

timer display

Failure Solution for 5-zone induction

E0 Configuration Error of

Interface

Exchange Interfaces

E1 Compatibilty failure Exchange Interfaces

E2 n/a -

E3 Overvoltage; wrong

connection

Check power supply

E4 Temperature sensor coil

defect

The zone with the defect sensor

displays “E” or “?

”

Change the Coil of the displayed

zone

E5 Supply voltage out of range 1. Check Voltage and

Frequency

2. Exchange module left side

E6 Induction module defect Change module left with power

supply

“E7” in Timer display +

“E” or “?

”in the left zones

Change induction module on the

left side

“E7” in Timer display +

“E” or “?

”in the right zones

Change iduction module on the

right side

E8 Communication error with

the power board

1. Check supply connection

2. Check wiring between

interface and power

board

3. Change induction module

E9 Internal interface error Exchange interface with silicone

carrier

Error in the

timer display

Failure Solution

E0 Configuration Error of

Interface

Exchange Interfaces

E1 Compatibilty failure Exchange Interfaces

E2 Pot detection error If pot detection is available

change Pot detection electronic

E3 n/a -

E4 n/a -

E5 Supply voltage out of range,

one phase missing

1. Check Voltage and

Frequency

2. Exchange module right side

E6 Induction module defect Change module left with power

supply

E7 “E7” in Timer display +

“E” or “?

”in the left zone

Exchange displayed heater with

pot detection senor and calibrate

new

E8 Communication error with

the power board

1. Check supply connection

2. Check wiring between

interface and power board

3. Change induction module

E9 Internal interface error

Liquid blocks interface

Exchange interface with silicone

carrier

1 2 ... 5 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios

AEG Electrolux EHD 8680 X Manual de usuario Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Placas AEG Electrolux EHD 8680 X