Aeg-Electrolux EE7004011M Manual de usuario

EE7004011ENOVEN USER MANUAL

Sensor Field Function Description2ON/OFF To activate and deactivate the appliance.3OPTIONS To set an oven function or programme.Straight access to t

4Residual heat indicator5Indicators for the clock functions (refer to the table "Clock functions")6Heat up indicator7Number of oven function

2. To end the cooking process, turn the control knob to the off position.Automatic heat-up functionThis information is applicable only if you install

Oven function Application5 Frozen Foods To make your convenience food like e.g. French Fries, Wedg-es, spring rolls crispy.6 Turbo Grilling To roast l

The fast heat up is not available with every oven function. An acoustic signal operates if thefast heat up is not available for set function.Energy sa

2. Touch again and again until the dis-play shows . flashes in the display.3. Use or to set minutes for DURA-TION.4. Touch to confirm5. Use or

function. During these two minutes you can examine the cooking results and, if necessary,add END or DURATION time.Setting the Time delay functionDURAT

2. Touch or to choose the automatic recipes.3. Touch or the automatic recipe activates automatically after five seconds.4. When set time ends, an

• The core temperature: refer to the table for the core temperature sensor in the recipebook.Only use the core temperature sensor supplied or original

When you put the core temperature sensor into the socket, you cancel the settings for theclock functions.When you cook with the core temperature senso

FOR PERFECT RESULTSThank you for choosing this AEG product. We have created it to give youimpeccable performance for many years, with innovative techn

1. Set the temperature and time for an oven function or programme.2. Touch and hold for more than three seconds.An acoustic signal sounds.3. Deactiva

Indicator of the setting menu Description Value to setSET2 RESIDUAL HEAT INDICATOR ON/OFFSET3 KEY TONE CLIC/BEEP/OFFSET4 FAULTY TONE ON/OFFSET5 SERVIC

– if you touch any of the sensor fields during night brightness (apart from ON/OFF), thedisplay goes back to day brightness mode for next 10 seconds;–

2. Pull the shelf support from the back ofthe side wall to remove it.To install the shelf support follow the proce-dure in reverse.Valid with telescop

Replacing the oven lamp:1. You can find the lamp glass cover at the cavity ceiling.Turn the lamp glass cover counterclockwise to remove it.2. Clean th

The number of glass panels if different for the different models.CAUTION!Put the door with the outer side down on a soft and level surface to prevent

Problem Possible cause SolutionThe oven lamp does not oper-ateThe oven lamp is defective Replace the oven lamp.The display shows F102 The door lock is

27

www.aeg.com/shop 892945912-A-282011

CONTENTS4 Safety information7 Product description9 Before first use9 Control panel12 Daily use14 Clock functions16 Automatic programmes17 Using the ac

SAFETY INFORMATIONBefore the installation and use, read this manual carefully:• For your personal safety and the safety of your property• For the res

• Before the installation, make sure that the kitchen cabinet has the recess dimensions ap-plicable.• Make sure that the appliance is installed below

• Always close the appliance door when you cook, even while grilling.Care and cleaning• Before maintenance, switch off the appliance and disconnect th

Disposal of the appliance• To prevent the risk of physical injury or damage– Disconnect the appliance from the power supply.– Cut off the mains cable

11Shelf support, removable12Shelf positionsAccessories• Wire shelfFor cookware, cake tins, roasts.• Baking trayFor cakes and biscuits.• Combi panFor c

BEFORE FIRST USEWARNING!Refer to "Safety information" chapter.Initial Cleaning• Remove all parts from the appliance.• Clean the appliance be