
Problem Possible cause Solution
The oven lamp does not operate The oven lamp is defective Replace the oven lamp.
The pyrolytic cleaning does not
operate (the clock display
shows „C1“)
The shelf runners/telescopic
shelf runners are not removed
Remove side rails/oven shelf
runners
The pyrolytic cleaning does not
operate (the time display shows
„C3“)
The door is not correctly closed
or door lock is defective
Close the door correctly
The display shows F11 • There is a short circuit of the
meat probe
• The meat probe plug is not
correctly installed into the
meat probe socket
Install the meat probe plug as
far as possible
The display shows F2 • The door is not closed cor-
rectly
• The door lock is defect
• Close the door correctly
• Switch off the appliance
with the house fuse or the
safety switch in the fuse box
and switch it on again
• If the display shows F2 again,
refer to the Customer Care
Department
The display shows an error code
that is not in this list
There is an electronic fault • Switch off the appliance
with the house fuse or the
safety switch in the fuse box
and switch it on again
• If the display shows the error
code again, refer to the Cus-
tomer Care Department
If you can not find a solution to the problem, refer to your dealer or the Service Force
Centre.
WARNING!
Let a qualified electrician or competent person do repairs to the appliance.
WARNING!
If you do not operate the appliance correctly, the visit from the Service Force Centre or
dealer will not be free of charge, even during the warranty period.
Hints for appliances with metal fronts:
If you open the door during or immediately after the baking or roasting procedure, steam
can show on the glass.
Disposal
The symbol on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it should be taken to the appropriate collection point
Disposal
31
Comentarios a estos manuales