
What to do if…
Problem Possible cause Remedy
The cooking zones do not op-
erate
Consult the operating instructions for the built-in cooking sur-
face
The oven does not heat up The oven is not switched on Switch on the oven
The oven does not heat up The clock is not set Set the clock
The oven does not heat up The necessary settings are not
set
Control the settings
The oven does not heat up The fuse in the fuse box is re-
leased
Control the fuse. If the fuse is
released more than one time,
refer to a qualified electrician.
The oven lamp does not operate The oven lamp is defective Replace the oven lamp
The pyrolysis function does not
operate (the time display shows
"C1")
Shelf support rails/oven shelf
runners are not removed
Remove shelf support rails /
oven shelf runners
The time display shows "F2" Door is not closed correctly Close the door correctly
The time display shows "F2" The door lock is defective Switch the appliance off and on
again through the fuse or the
safety switch in the fuse box. If
the display shows the error
message again, refer to the
Service Force Centre
The time display shows an error
code which is not in the list
Electronic error Switch the appliance off and on
again through the fuse or the
safety switch in the fuse box. If
the display shows the error
message again, refer to the
Service Force Centre
If you can not find a solution to the problem, refer to your dealer or the Service Force
Centre.
WARNING!
Let a qualified electrician or competent person do repairs to the appliance.
If you do not operate the appliance correctly, the visit from the Service Force Centre or
dealer will not be free of charge, even during the warranty period.
Hints for appliances with metal fronts:
If you open the door during or immediately after the baking or roasting procedure, steam
can show on the glass.
What to do if…
25
Comentarios a estos manuales