
3. Hold the door glass panels on their top edge one by one and pull them upwards out of
the guide
4. Clean the door glass panels.
To install panels follow the procedure in reverse. Insert the smaller panel first, then the
larger.
What to do if…
WARNING!
Refer to "Safety information" chapter.
Problem Possible cause Remedy
The cooking zones do not op-
erate
Consult the operating instructions for the built-in cooking sur-
face
The oven does not heat up The oven is not switched on Switch on the oven
The oven does not heat up The clock is not set Set the clock
The oven does not heat up The necessary settings are not
set
Control the settings
The oven does not heat up The fuse in the fuse box is re-
leased
Control the fuse. If the fuse is
released more than one time,
refer to a qualified electrician.
The oven lamp does not operate The oven lamp is defective Replace the oven lamp
The time display shows "F2" Door is not closed correctly Close the door correctly
The time display shows "F2" The door lock is defective Switch the appliance off and on
again through the fuse or the
safety switch in the fuse box. If
the display shows the error
message again, refer to the
Service Force Centre
The time display shows an error
code which is not in the list
Electronic error Switch the appliance off and on
again through the fuse or the
safety switch in the fuse box. If
the display shows the error
message again, refer to the
Service Force Centre
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
What to do if…
27
Comentarios a estos manuales